FAQ
Q: What kind of gravel do I need?
A: Crushed gravel is suitable for parking areas, driveways, and walkways because it compacts and doesn’t shift around as easily as landscape gravel. Landscape material used in these applications would be similar to trying to walk or drive through marbles. For drainage purposes, our construction gravels would be best. For landscaping projects, our landscape gravel would be the best choice.
Q: How do I order a delivery?
A: Determine what type of product you want to have delivered, the amount, when you want to have it delivered, and contact our nearest location 2 days prior.
Q: Can you "spread" the crushed gravel in my driveway?
A: Our drivers will do their best to spread your delivery, given the limitations they encounter at your location—overhead wires, trees, access, etc.
Q: What is the average coverage per ton?
A: A good rule of thumb is that one ton of sand or gravel (1-1/4″ or smaller) will cover an area of 100 square feet at a depth of two inches*. Coverage decreases as the size of the aggregate increases.
Q: What is the average coverage per ½ yard scoop?
A: A ½ yd scoop will cover about 70 square feet at a depth of two inches.
Q: How much is a scoop?
A: One scoop is approximately 13 cubic feet and will cover 50 square feet at 3″ deep. One scoop weighs 1,000–1,500 pounds depending on the material. One scoop is 1/2 cubic yard.
Q: What is Crusher Run?
A: Crusher Run is a type of gravel that consists of angular, crushed rock ranging in size from 3/4-inch to silt. Several factors influence the success and longevity of a Crusher Run driveway, including an adequate base, crown, and drainage. Check with the governing municipality or jurisdiction before beginning driveway construction, as there are often regulations that apply to driveway materials, slope, and other factors.
Q: Which gravel should I use for a French drain?
A: #57, also called 3/4 clean stone, is commonly used for driveways and French drains. Water flows well through it, and the pieces are large enough that they won’t fall through the drainage holes in the pipe used for this type of drain.
Q: What is the difference between masonry sand and coarse "concrete" sand?
A: Masonry sands have a fine consistency and are mixed with mortar or cement. The fine grains also make it a good choice for children’s sandboxes or to put underneath the liner of an above-ground pool. Coarse sand is very much like beach sand. Applications vary, but it is used largely as the second layer (on top of the Crusher Run) in the base of a patio or walkway.
Q: I expanded a dry creek bed that I installed last year and the color of the gravel doesn't match. Why?
A: Gravels and other aggregates are natural products; therefore, the color, size, and texture will vary each time the stock is replenished.
Q: Besides driveways, drains, and as a base for patio construction, in what other ways can I use gravel or aggregates for landscaping?
A: Depending on the size of the aggregate, you can use them in dry creek beds, waterfalls, as garden accents, borders, and for dog runs. Use larger river rocks under the eaves of your house to limit runoff and in low spots to reduce standing water. Carefully placed aggregates can reduce or eliminate erosion in areas with heavy water flow. Aggregates are inexpensive and have a variety of functions, from practical to cosmetic.